How to use electric stove

1. The power cord shall meet the requirements: due to the large power of the electric heater, when configuring the power cord, the copper core wire that can withstand 15A current shall be selected, and the supporting sockets, plugs, switches, etc. shall also meet this requirement. Otherwise, the large current during the operation of the electric heater will heat or burn the wires and sockets. In addition, if possible, a fuse box should be installed at the power cord socket to ensure safety.

2. The table top of the electric stove should be flat, especially when eating hot pot on the table. If the table top is uneven and one foot of the electric heater is suspended, the gravity of the cooker will force the furnace body to deform or even damage. In addition, if the table top is inclined, when the electric stove heats up the cooker, the micro shock generated by the cooker is also easy to make the cooker slip out and cause danger.

3.Ensure that the air hole is unobstructed: the electric furnace in operation will rise with the temperature rise of the cooker. So. When installing the electric heater in the kitchen, ensure that there is no object blocking the air inlet and exhaust holes of the furnace body. Do not pad (stack) objects or liquids that may damage the electric furnace on the side or below the furnace body. It should be noted that if the built-in fan of the electric heater does not work, it should be stopped immediately and repaired in time.

4. The cooker should not be too heavy: the electric stove is different from the cooker made of bricks or iron and other materials. Its bearing capacity is limited. Generally, the cooker with food should not exceed 5 kg, and the bottom of the cooker should not be too small, so that the pressure on the surface of the electric stove will not be too heavy or too concentrated. If it is necessary to heat the overweight and oversized pots and pans, the pots and pans shall be provided with additional support frames, and then the electric heater shall be inserted into the bottom of the pot.

5. How to clean the stove: like other electric appliances, the electric stove should be waterproof and moisture-proof in use, and avoid contacting harmful liquids. How to clean it has just been mentioned, and the stove surface that is in use or just finished should not be wiped with cold water immediately.

In order to avoid oil contamination of the furnace surface or the furnace body and reduce the cleaning workload of the electric furnace, a piece of paper slightly larger than the furnace surface, such as waste newspaper, can be placed on the furnace surface when the electric furnace is used to soak up the water, oil and other contaminants that jump in and overflow from the boiler, and the paper can be discarded after use.

6. The furnace protection function shall be in good condition: the electric furnace has good automatic detection and self-protection functions, which can detect such conditions as furnace surface appliances (whether metal bottom), proper use, and excessive furnace temperature. If these functions of the electric heater are lost, it is very dangerous to use the electric heater.

7. Press the buttons lightly and simply: the buttons of the electric heater are light touch type, and the force of the fingers should not be too heavy when using. When the pressed button is started, the finger should leave, and do not hold it down to avoid damaging the reed and conductive contact piece.

8. If the furnace surface is damaged, it should be stopped: the electric furnace surface is usually a crystallized ceramic plate, which is fragile. If it is damaged, it should be stopped.